craigslist | tools in portland, OR

Homelite Yard grass trimmer and edger (5410 N Princeton St) $25

2008-07-03T15:39:38-07:00

Homelite gas and oil mixture trimmer, full tank, remainder of gallon container and new spooll of trimming twine, all included.

Jason
503-285-2336
5410 N Princeton St.

Antique Primitive Pine Dresser (North Plains, Or) $445

2008-07-03T15:38:12-07:00

Dresser has original Swivel Mirror. Overall dimensions 41 1/2"W x 60" H x 16" deep. Simply adorable!. $445 503 647-5601.

Foley Automatic Saw Filer, Model 387 (North Plains, Or) $175

2008-07-03T15:34:40-07:00

Used Automatic Saw Filer, Model 387. Automaticly files Handsaws, regular Circle Saws (NOT CARBIDE) and Bandsaws. This tool has a motor-driven triangular file and a feed pawl that can be adjusted in a number of ways to sharpen many types of hand, circular and bandsaw teeth. Basically any saw that can be sharpened with a 3 cornered file can be automactically sharpened with this filer. Comes with a straight handsaw carrier (shown standing upright in first picture below) I bought this several years ago but never used it and now have decided to clean out my shop (See other Foley brand blade maintenance equipment on Craigslist). Foley does offer replacement parts for this tool, if ever needed. I don't know much about the machine but have plugged it in and it appears to run fine. It appears to have been well cared for by the looks of it. The machine is setting on a home made steel stand with 4 small wheels attached for easy movement. Includes user manual. $175 OBO 503 647-5601

Tools (Vancouver) $400

2008-07-03T15:33:17-07:00

Delta 10" contractors table saw, many accessories.Contact 9am-6pm
360-601-0360

UpholsteryFoam Cutter (Estacada) $100

2008-07-03T15:32:53-07:00

I am selling a upholstery foam cutter. Will post picture later.

Foley Manual Circular Saw Setter, Model 353 (North Plains, Or) $35

2008-07-03T15:32:42-07:00

Used for putting tooth set in rip, crosscut and combinations blades from 5" to 36" in diameter. Blade arbor capacity 1/2" to 2". I bought this several years ago but never used it and now have decided to clean out my shop (See other Foley brand blade maintenance equipment on Craigslist). Saw Setter does not appear to have been used very much. $35 OBO 503 647-5601

Foley Automatic Hand Saw Retoother, Model 385 (North Plains, Or) $80

2008-07-03T15:30:48-07:00

Used Automatic Hand Saw Retoother, Model 385. Automaticly replaces old hand saw teeth by punching new teeth that are uniform in size and spacing. Retoother is missing the handsaw carrier which is the same carrier that I'm selling with the Automatic Saw Filer Model 387 that I also have on Craigs List (the same handsaw carrier works on both machines). I bought this several years ago but never used it and now have decided to clean out my shop (See other Foley brand blade maintenance equipment on Craigslist). Foley does offer replacement parts for this tool, if ever needed. I don't know much about the machine but have plugged it in and it appears to run fine. It appears to have been well cared for by the looks of it. The machine is setting on a home made steel stand. Includes user manual. $80 OBO 503 647-5601

Tools (Vancouver) $275

2008-07-03T15:29:24-07:00

Delta 16 1/2" Floor Model Drill Press MDL#17-965, all paperwork and manuals.
Contact 9am-6pm 360-601-0360.

Titan 440E Airless Paint Sprayer (Vancouver) $375

2008-07-03T15:29:10-07:00

A Titan 440E airless paint sprayer. Includes hose and gun with extension tip.

All in good working order. Ready to use.

Dewalt Cordless $200

2008-07-03T15:29:01-07:00

Dewalt Cordless Impact screw gun. 18volt lithium Ion Nano Batt(2) charger and case, less then 6 months old.

Helium regulators for blowing up balloons (fairview) $40

2008-07-03T15:26:47-07:00

I have two helium regulators that retail for around 40.00 each that I'm selling. I will let them go for 25.00 each or the pair for 40.00. Delivery may be possible if you're not too far. The box says they are handtight connection.

Thanks for looking!

Tools for sale (Vancouver) $350

2008-07-03T15:24:58-07:00

Delta 6" Professional Jointer MDL#37-195, used 3 times, all the paperwork and
tools. contact 9am-6pm 360-601-0360

4 HEAVY DUTY JACK STANDS (Vancouver, WA) $60

2008-07-03T15:23:39-07:00

TO SET VEHICLES LIFTEDA COMPLETTE SET OF 4 CAR JACK STANDS, BRAND NAME IS MVP SUPER LIFT.. LIFTS 3 TONS OR 6,000 POUNDS.. LIFT RANDG IS UP TO 13 1/8-21INCH.. ELEVATION IS 333MM-533MM..
PLEASE IF YOU ARE INTERESTED IN SOMETHING LIKE THIS GIVE ME A CALL AT 360 624-8761 AND THE NAME IS ALEX..
THANKS!!

CORDLESS DEWALT 14.4 VOLT DRILL (Portland/Lake Oswego) $125

2008-07-03T15:20:59-07:00

Fairly new cordless dewalt 14.4 volt drill. Looking to sell as soon as possible. Please let me know if your interested. Please call 503-484-8506. Willing to maybe go down on the price a little. NEED TO SELL ASAP! Comes with a hard carrying case, extra battery, and charger.

Never Used Lincoln Flux Core welder (carlton) $175

2008-07-03T15:12:54-07:00

Picked this up a couple months ago to do learn to weld but just don't have the time now like I planned so trying to unload it from taking up space. Like the title states I have never used this. Here is a link to exactly what it is from the place I bought it http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=100031840

just asking 175$ obo.. thanks

vintage DELTA-ROCKWELL {lift&roll} factory tool stand mobile set (portland) $20

2008-07-03T15:09:43-07:00

for bottom curved (outward) legs only >foot lever press to lift.........can send pic

Tools for sale (SE Portland) $1

2008-07-03T15:04:00-07:00

Purchased tools from Sears about 1 1/2 years ago and need to sell due to moving. All the tools have hardly been used, in great condition, must see, cash only please TOOLS: 25 gallon Portable Craftsman Compressor, 2007 model no. 919.195411 with dewalt 16 gauge 1 1/4" - 2 1/2" finish nailer.....$180.00 Two Orbital Sanders....one craftsman model no. 315.279620 the other dewalt model no. DW317 $25.00 each Craftsman router table and router.......$60.00 Craftsman Bisket jointer, unused....$50.00 13' Louisville ladder.....$25.00 Call Jeff for more details and faster responce between 10a.m and 9p.m.
971-212-2040

Case Riding Trencher (Camas, WA) $11000

2008-07-03T15:00:40-07:00

1999 Case 460 Riding Trencher, extremely low hours, 4-way blade, 4 ft digging depth, excellent condition. Kubota diesel Motor, Model #120689A1. Call Trianna with questions, or if you would like to come take a look 360-833-2076.

MQ Light Tower/Welder/Generator (Camas, WA) $6999

2008-07-03T14:59:14-07:00

MQ Light Tower Diesel Engine Driven Welding Generator, top of the line, Model # SDW-225SS, has 4 lights. Works like new, low hours 1318.5,new battery, One owner, well serviced. Welding Leads not included, Kubota Diesel Motor z482. Call Trianna 360-833-2076.

MILWAUKEE 4-PAC COMBO KIT (CORNELIUS) $650

2008-07-03T14:58:06-07:00

The 0928-29 is the ultimate combo kit for those who demand extreme power, superior performance and the longest running cordless tools. The 0928-29 features the revolutionary 28 Volt Lithium-Ion battery pack exclusively from Milwaukee. The 28 Volt battery pack weighs less than an 18 Volt pack yet delivers two times the run-time making this the ideal solution for all cutting, drilling and driving needs! The Milwaukee 0724 28 Volt 1/2 in. Hammer-Drill uses the Milwaukee built high power motor to develop an enormous 600 in. lbs. of maximum torque and 0-600/0-1800 rpm. The 0724 comes standard with a 1/2 in. all-metal, single-sleeve, ratcheting chuck with all carbide jaws that keeps bits from falling out and drill bits from slipping! A comfortable non-slip, soft-grip handle reduces vibration and fatigue. The 0724 also comes standard with the patented Clip-Lok� System. The Clip-Lok� System attaches securely to the operator's belt or tool bags and easily releases with one hand, ideal when working from a ladder or when there is nowhere to place the tool when adjusting or positioning a work piece. The Clip-Lok� System keeps the drill within arms length at all times. The Clip-Lok� System also features an on-board bit holder, which holds up to two standard Phillips bits. The 0719 28 Volt Sawzall� Reciprocating Saw produces an amazing two times the runtime of 18V reciprocating saws. The variable speed trigger provides two levels of speed range: 0-2000 and 0-3000 strokes per minute. The 0719 also features a 1-1/8 in. stroke length, Quik-Lok� blade clamp, patented gear protecting clutch, and keyless shoe adjustment. The 0730 6-1/2 in. Circular Saw has the most power of any cordless circular saw, enough to cut over 300 2 x 4's on a single charge! The 0730 has a left-side blade for increased cut-line visibility, 4200 rpm for extremely fast cutting, 50� bevel capacity and all-metal blade guards. The 49-24-0185 Work Light features a high intensity Xenon bulb, is Clip-Lok� System compatible and delivers over 5-hours of run-time on a single battery.

CALL JACK OR ED AT 503-992-7368

MILWAUKEE 1/2 MAGNUM DRILL 0299-20 (CORNELIUS) $100

2008-07-03T14:57:47-07:00

Technical Details

* Powerful 8.0 amp motor delivers 0 to 850 rpm, variable speed control
* Heavy-duty keyed chuck, all-metal gear case and diaphragm
* 8-foot, 3-wire rubber cord and 360-degree locking side handle
* Ergonomic textured grip and two-finger trigger for user comfort and balance
* Limited Warranty

CALL JACK OR ED AT 503-992-7368

Wacker Light Tower/Generator (Camas, WA) $7000

2008-07-03T14:57:47-07:00

Wacker Light Tower/Generator, Model LT4, low hours, 1191.4, works like new, one owner, well serviced, Diesel Isuzu motor 3LB1. Call Trianna @ 360-833-2076.

MILWAUKEE 7 1/4 CIRCULAR SAW W/TILT LOCK HANDLE (CORNELIUS) $125

2008-07-03T14:57:25-07:00

Technical Details

* 7-1/4-inch circular saw; locking, tilting main handle adjusts for comfort
* 15 amp; 5,800 rpm; 3-1/4 horsepower; spindle lock; quick-lock cord for quick field replacement
* Aircraft aluminum shoe; soft-grip handle
* Includes saw, blade, wrench, case
* 13-3/4 inches; 10.4 pounds; 5-year warranty

CALL JACK OR ED AT 503-992-7368

MILWAUKEE 18V 1/2 HAMMER-DRILL KIT 0627-24 (CORNELIUS) $220

2008-07-03T14:56:33-07:00

Technical Details

* 18-volt hammer drill with a 1/2-inch keyless chuck
* Reversible Battery lets drill fit in tight areas and optimizes balance while working overhead
* Single-sleeve ratcheting chuck with carbide jaws; high-efficiency motor that delivers up to 495 in./lbs. of torque
* Includes insert bit, 1-hour charger, 18-volt battery, Clip-Lok belt clip, side handle, carrying case
* Hammer drill weighs 6.7 pounds (15.5 for shipped kit); 5-year manufacturer's warranty

CALL JACK OR ED AT 503-992-7368

BOSCH DEMOLITION HAMMER 11316EVS (CORNELIUS) $700

2008-07-03T14:56:04-07:00

Technical Details

* SDS-max bit system - tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
* Variable-speed dial - for controlled chipping applications
* Constant Response Circuitry - - Provides soft-start - Maintains constant speed under load - Provides overload protection
* Service Minder light - indicates when preventative maintenance is required
* Vario-Lock positioning - rotates and locks chisel into 12 different positions to optimize working angle

CALL JACK OR ED AT 503-992-7368

BOSCH DEMOLITION HAMMER 11245EVS (CORNELIUS) $825

2008-07-03T14:55:20-07:00

Technical Details

* Rotary hammer with SDS-max� bit system for tool-free bit changes, automatic bit locking, dust protection, and efficient impact-energy transfer rate
* "Combination" dual mode selector - 2 modes of operation, rotary hammer and hammer only mode
* Variable-speed dial - for accurate bit starting and controlled chipping applications
* Include auxiliary handle, carrying case
* 23-1/2 inches long, 24-1/2 pounds; 1-year warranty

CALL JACK OR ED AT 503-992-7368

PASLODE CORDLESS 16GA. ANGLED FINISH NAILER 900600 (CORNELIUS) $299

2008-07-03T14:54:56-07:00

Paslode IM250A, 16 Gauge, Cordless, Angled Finish Nailer, Drives 1-1/4" To 2-/2", No Hose Or Compressor Required, 1 Year Warranty.

CALL JACK OR ED AT 503-992-7368

PASLODE F-250S-PP METAL HARDWARE NAILER (CORNELIUS) $275

2008-07-03T14:54:33-07:00

Technical Details

* Positive placement metal hardware framing nailer provides productive and accurate metal hardware attachment
* Ideal for metal framing hardware, joist hangers, wall bracing and strap ties
* Air-powered metal hardware nailer
* Hardened nose probe for accurate nail placement; smart lever system automatically adjusts for different nail sizes
* 1-year limited warranty

CALL JACK OR ED AT 503-992-7368

PASLODE CORDLESS 16GA.FIISH NAILER 902000 (CORNELIUS) $280

2008-07-03T14:54:11-07:00

Finishing Cordless Nailer Volts 6 Fastener Range 3/4 To 2 1/2 In Replacement Battery Pack 4WL38 Magazine Straight Magazine Capacity 110 Magazine Loading Rear Handle Type Anti Slip Rubber Triggering Mode Sequential Fastener Type 16 Gauge Width 3 15/16 In Tool Weight 5.3 Lb Requires Fuel Cell and Rechargeable Battery to Operate Replacement Fuel Cell Not Included 5VK14 Includes 120 Volt Charger 1 Battery Reversible Belt Hook 1 No Mar Tip Safety Glasses Carrying Case

CALL JACK OR ED AT 503-992-7368

Wacker 3" Diaphragm Pump (Camas, WA) $1500

2008-07-03T14:53:42-07:00

1999, Wacker 3" Diaphragm Pump, Model # PDT3A, works great, reply to this ad or call Trianna @ 360-833-2076.

Bridgeport Series II 3-Axis CNC Milling Machine with New Centroid (Vancouver, WA) $15600

2008-07-03T14:53:30-07:00

This is a used 1980's BRIDGEPORT SERIES II 3 Axis CNC machine and has a new CENTROID M-39 CONTROL. This machine is in EXCELLENT condition with beatiful ways. It comes with FULL THREE AXIS CNC Controller and a hand held JOG PENDANT. It has been upgraded with a new Baldor 5 HP Spindle Motor and variable frequency drive which gives you FULLY PROGRAMMABLE spindle speeds and the ability to run 220V single phase.

The TRAVELS are 30"X, 15"Y, and 5"Z (quill) with an additional 14" of manual knee travel with air assist. The spindle is a qwik swich 30. This is a 5,000 lb. machine not to be confused with light duty 2,200 lb machines.

The machine features a NEW show quality 3 coat paint job and Metal Way Covers in X. It has rubber way covers on the Y and Z axes. The machine is very tight and ready to run your precision parts. This machine sold new in the 80's for about $48,000. Comparable new machines today sell for $28,000 and higher. This is an incredible buy today for $15,600.

For more information on the control features and benefits of the Centroid Control go to their website @ Centroidcnc.com. The machine is located in BATTLEGROUND, WA and is available for viewing and running. ANY QUESTIONS PLEASE CONTACT JERRY KOHLER (503)998-0985 or email.

PASLODE F-350S 30 DEGREE STRIP NAILER (CORNELIUS) $240

2008-07-03T14:53:15-07:00

Technical Details

* Powerful nailer with on-tool depth of drive adjustment
* Lightweight and well balanced; Rafter hook and measuring rule on the magazine
* Drives framing nails from 2 To 3-1/2 inches long
* Designed for all-weather use
* Weighs 7.9 pounds; 1-year warranty
CALL JACK OR ED AT 503-992-7368

MILWAUKEE 1/2 HAMMER-DRILL KIT 5378-21 (CORNELIUS) $125

2008-07-03T14:52:50-07:00

This popular 1/2 inch Hammer-Drill is now available in a kit with an impact resistant carrying case. This Hammer-Drill features a two mode selection switch for hammer-drilling in concrete or rotation only for drilling in wood. It also offers a synchronized gear shift for high speed or high torque. The compact ergonomic design has a soft grip handle and two finger trigger switch for greater operator comfort. This tool is ideal for setting concrete screw fasteners and drilling small holes for anchors. It can also be used in the drilling only mode for holes in wood, steel and plastic.

Milwaukee 5378-21 1/2 in. Pistol Grip Dual Torque Hammer-Drill, 0-1350/0-2500 RPM with Case Features:
� 1/2 in. capacity; 7.5 amp motor
� Trigger speed control in two ranges: 0-1350 rpm, 0-22,000 bpm; 0-2500 rpm, 0-40,000 bpm; reversing
� Hammer with rotation or rotation only
� Self-stop brush system

Milwaukee 5378-21 1/2 in. Pistol Grip Dual Torque Hammer-Drill, 0-1350/0-2500 RPM with Case Specifications:
� Voltage: 120 AC
� Amps: 7.5
� No Load Speed: 0-1,350/0-2,500 RPM
� No Load BPM: 0-20,000/0-40,000
� Chuck Type: Keyed
� Cord Type: 10 ft. Fixed
� Trigger Lock: On
� Capacity in Steel: 1/2 in.
� Capacity in Concrete: 3/4 in./3/8 in.
� Selfeed Bit Capacity: 1-3/4 in.
� Length: 13 in.
� Tool Weight: 6.0 lbs.
� Shipping Weight: 11.9 lbs.
CALL JACK OR ED AT 503-992-7368

Wacker 2" Trash Pump (Camas, WA) $1100

2008-07-03T14:52:27-07:00

1999 Wacker 2" Trash Pump, works great, model # PT2A, reply to this ad or call Trianna @ 360-833-2076.

Atlas Copco 185 Compressor (Camas, WA) $8000

2008-07-03T14:51:40-07:00

Atlas Copco Compressor 185 CFM, new paint, well maintained, Model 3 XAS96, 1400 hours. Reply to this ad or call Trianna @ 360-833-2076.

SHIZUOKA ANS CNC Milling Machine w/ Anilam 1100 (Vancouver, WA) $8900

2008-07-03T14:51:32-07:00

This is a used 1980's Shizuoka ANS CNC Milling Machine with an Anilam 1100 Control in very good condition. We are in the process of taking off the old Bandit Controller and installing a fine working Anilam 1100 contol that had low hours on it. It will be equipped with 40 in/lb SEM DC Servo Motors. The control display will be mounted where the Bandit display is pictured. The NEMA enclosure with all the electronics will be mounted on the right side of the machine as you face it. I will also provide 5 tool holders for the NMTB 40 spindle. The machine will be ran in and tested by myself and a CNC technician. All the Anilam manuals are included. Can be inspected under power. Please email or call with questions. Jerry: 503-998-0985. We can load the machine at no charge on your small flat bed truck, or can help arrange a truck. Happy Bidding! The Machine specifications: Working surface 51" x 11" T-slot 5/8" x 3" x 2.3/8" Max Table Load 500lbs (230 kgs) Longitudinal travel (X) 31" Cross travel (Y) 17" Spindle quill travel (Z) 5.1/2" Vertical table travel (manual) 17" Spindle nose taper AST40 Spindle Speeds 85 - 3800 RPM (variable) Spindle drive motor 3kW (4 HP) Feed rates 0.2 - 120 ipm Feed rapid traverse (X & Y) 200 ipm, (Z) 120 ipm Ram travel (manual) 17" Weight approximately 2.5 ton

Circular Saw (Cedar Hills) $25

2008-07-03T14:51:15-07:00

Circular Saw 7 1/2 "
Manning Bowman
5000 rpm

Please call 503-644-5617

Best times to call 8-10:00 am and 9:00-10:00 pm

Miller Welder (Camas, WA) $300

2008-07-03T14:49:52-07:00

Miller welder, 3 phase, Goldstar 400ss, 19.8 kw, Amperes 76/38/30, volts 230/460/575, constant current arc welding power source, Serial# KA873107. Reply to this ad, or call Trianna @ 360-833-2076.

Mortar Mixer (Camas, WA) $2500

2008-07-03T14:49:09-07:00

MQ Whiteman Mortar Mixer, new paint, Model# HC-753201, well maintained. Reply to this ad or call Trianna @ 360-833-2076.

Kobelco 35 Mini-Excavator (Camas, WA) $30000

2008-07-03T14:47:30-07:00

Kobelco 35 Mini-excavator, Model# SK35SR3, 1585 hrs, well maintained. Reply to this ad or call Trianna @ 360-833-2076.

New CNC Lathe Flat Bed 1640TC with Centroid T400 CNC Control (Battle Ground, WA) $22600

2008-07-03T14:47:06-07:00

This is a New1640 CNC lathe with a new Centroid T Series Control. It is equipped with a spindle bore of 2.16�, swing 16� and Distance between centers 40�. A 12 position automatic vertical tool turret is available as an option. FEATURES: Flat bed CNC lathe with CENTROID T400 control and drive system User friendly conversational programming language Different modes of operations available  1. Operate as manual lathe with electronic hand wheels, 2. Operate as a full CNC lathe with programmable speed, using conversational language or G code language,  3. Operate semi automatically, combining manual and CNC operations   4. Teach mode 5. Fully automatic using optional auto 12 tool turret D1-6 spindle, 2.16 spindle bore. Geared head with 3 steps speed change, programmable speed One Piece Cast Meehanite Bed 5 HP Spindle Motor operates single or 3 phase Centroid Control Features: 15" LCD Monitor Industrial PC 1GB Solid State Hard Drive CNC Linux Control Software (2) USB Ports RS-232 Port Ethernet Connection Fiber Optic Noise Prevention 2D/3D Part Program Graphics Graphical Part & Tool Setups Conversational & G-code Programming Extensive Canned Cycles Graphical Help Menus Cutter Compensation Background Editing Teach Mode Standard or Metric Units STANDARD ACCESSORIES: Coolant Pump System Halogen Work Light Auto Lube System Timing Belts Safety Guards Electronic Handwheel Main Motor 5 hp Encoder for Spindle rpm Mounting Block for Toolpost OPTIONAL ACCESSORIES: 3-Jaw Chuck 10� (direct mount) $ 875.00 KDK Quick Change tool post set $ 800.00 Sauter 12 Position Auto Turret $ 4,000.00 Come and see it running under power. Any questions please contact Jerry Kohler @ 503-998-0985

Heidenhein TNC151 3-Axis CNC Controller (Vancouver, WA) $400

2008-07-03T14:45:45-07:00

This is a used Heidenhein Control. It includes the 3 SEM Servo Motors, Nema Enclosure with Drives and PLC relays, transformers, etc. This is a German built controller. I personally saw the controller working before it was taken off line. To purchase just one of these motors alone would be aprox. $800.

Dewald Dump Hopper (Camas, WA) $900

2008-07-03T14:45:42-07:00

Dewald Dump Hopper 1.5 Cubic yards, Model #215. Reply to this ad or call Trianna @ 360-833-2076.

Wacker Generator on wheels (Camas, WA) $1350

2008-07-03T14:44:41-07:00

Wacker Generator on wheels G 3.7, 120/240 Volts, 8.0 Honda Engine, well maintained. Reply to this ad or call Trianna @ 360-833-2076.

Infra-Red Heater w/ Stand (Camas, WA) $175

2008-07-03T14:43:18-07:00

Infra-Red Ceramic Radiant Heater w/ Stand, 33,000 BTU, 5PSIG. Reply to this ad or call Trianna @ 360-833-2076.

Wacker Generator G 3.7 (Camas, WA) $1250

2008-07-03T14:42:05-07:00

Wacker Generator G 3.7, Honda motor 8.0, well maintained. Reply to this ad or call Trianna @ 360-833-2076.

NEW Snap-On Blue-Point 51 pc 1/4" Dr. Gneral Service Set (inner NE) $100

2008-07-03T14:38:41-07:00

I have two sets of the Blue-Point 51 pc 1/4" Dr. General Service Set for sale. They are $100 each obo. These are brand new and list for $140. Cash only!

Description: Drop forged, heat treated, chrome vanadium steel. Includes - 10 pc 1/4" 6 pt sockets SAE, 13 pc 1/4" 6 pt sockets MM, 3 pc 1/4" 8 pt sockets SAE, 6 pc 1/4" hex bit sockets, 6 pc 1/4" tamper torx bit sockets, 3 pc 1/4" slotted bit sockets, 3 pc 1/4" phillips bit sockets, 1 pc 1/4" driver quick release ratchet, 1 pc 1/4" spinner handle, 3 pc 1/4" extension bars, 1 pc 1/4" universal joint, 1 pc 1/4" flex handle.
here is a link to the set online: http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=77863&group_ID=20261&store=snapon-store&dir=catalog

Please respond by email.

Pro-Tech Aluminum Dual-Lid Truck Toolbox (Vancouver) $299

2008-07-03T14:33:55-07:00

Pro-Tech Aluminum Cross Body Dual-Lid Toolbox Fits Small to Midsize truck beds. *** Shown on a Chevy S10 ***

Aluminum welded construction. Stainless steel hinges Pro-Tech's own stainless steel �T-Lock� twist lock design snugs the lid down for complete weather-tight protection.

Durable gas struts and automotive quality seals. Measures: 60� x 20� x 13.5� Retail price: $585 ***I AM ASKING $299***

Snap-On Tools, Complete Sets (Portland)

2008-07-03T14:13:28-07:00

Snap-On Gear Puller Set. Part # CJ2002, $175.00 o.b.o.
Blue Point Bearing Race & Seal Driver Set. Part # A1310, $25.00 o.b.o.
Snap-On Ball Joint Press. Part # CJ76C, $200.00 o.b.o.
Snap-On Vacuum/Pressure Gauge Set. Part # MT311JB, $90.00 o.b.o.
Snap-On Compression Gauge Set. Part # MT308KB $75.00 o.b.o.
Snap-On 3/8" Dr. 6Pt Deep Impact Sckt Set, 3/8"-3/4", 7pc. Part # 207SIMFY $35.00 o.b.o.
Snap-On 3/8" Dr. 6Pt Shallow Impact Sckt Set, 3/8"-3/4", 7pc. Part # 207IMFMY
$25.00 o.b.o.
Snap-On 3/8" Dr. 6Pt Deep Impact Sckt Set, 8mm-24mm, 14pc. Part # 214SIMFMY
$75.00 o.b.o.
Snap-On #/8" Dr. 6Pt Shallow Impact Sckt Set, 8mm-24mm, 14pc. Part # 214IMFMY
$45.00 o.b.o.
Snap-On 3/8" Dr. 6Pt Shallow Impact Swivel Sckt Set, 10mm-18mm, 7pc. Part #
207IPFMY $110.00 o.b.o.
Snap-On 3/8" Dr. 6Pt Deep Impact Swivel Sckt Set, 10mm-15mm, 5pc. Part #
205IPLFY $85.00 o.b.o.
Snap-On 3/8" Dr. General Service Set, 6Pt Sckt & Ratchet Set W/Case. Part #
222AFSP $220.00 o.b.o.
Snap-On 12Pt Chrome Combination Wrench Set, 3/8"-3/4", 7pc. Part #OEX709B
2(Sets) $120.00 each o.b.o.
Snap-On Open End & FLare Nut Comb. Wrench Set, 3/8"-5/8", 5pc. Part #RXS605B
$75.00 o.b.o.
Snap-On 12Pt Chrome Combination Wrench Set, 10mm-19mm, 10pc Part # OEXM710B
$150.00 o.b.o.
Snap-On 12Pt Chrome Short Handle, 10deg. Offset Box Wrench Set.6mm-20mm, 8pc.
Part # XSM608A $100.00 o.b.o.
Snap-On 1/2"Dr. 6Pt Shallow Impact Sckt Set, 3/8"-1" 11pc. Part # 320IMY
$145.00 o.b.o.
Snap-On 3/8"Dr. Torqometer Part # TE12A $80.00 o.b.o.
Snap-On Swivel Bench Vise Part # WV1750 $150.00 o.b.o.
Snap-On 1/2"Dr. 6Pt Shallow Impact Sckt Set. 10mm-19mm 10pc. Part # 310IMMY
$125.00 o.b.o.
Many more available, Contact Dale 503-249-8276

Delta 10" Table Saw (Beaverton, OR) $1100

2008-07-03T14:07:44-07:00

Delta 36-812 10-Inch Right Tilt Cabinet Saw, 3 HP, 230-Volt 1 Phase--HAVEN'T EVEN USED---NICE SAW!!!...Selling because I am not able to use as it is just collecting dust.

$1100
(971) 533-6940

Generator (Wilsonville) $2800

2008-07-03T14:07:26-07:00

North star 13000 generator ,Honda motor new less then 20hrs call Paul @(503)678-1600

TOOLS AND SHOP FOR RENT (421 SE.GRAND) $150

2008-07-03T14:02:29-07:00

DO YOU NEED MORE TOOLS AND MACHINES ,MAYBE A PLACE TO BUILD SOMETHING. COME DOWN AND US MY SHOP FOR $150.00 per month. I HAVE TOOLS AND SPACE TO CREATE FOR WOOD

40 ft ladder brand new wener brand (mcminnville) $200

2008-07-03T13:59:59-07:00

brand new 40 ft ladder $200.00 503-560-2567
brand name is wener

Air Hose Reel (Battle Ground) $20

2008-07-03T13:40:28-07:00

The reel has auto-stop and auto-retrieve functions. Includes about 18 feet of air hose (OD is 5/8 inch). It has a swivel mount for wall or ceiling. Plastic orange case. Works fine.

Bosch 24 Volt Tools (SE Portland/Gresham) $250

2008-07-03T13:38:08-07:00

I have 24 volt Bosch tools for sale. The kit includes a light, drill, charger, circular saw, and I also have a sawzall. The tools air in excellent condition and need a new home.

(( B E N C H G R I N D E R )) (BANKS) $25

2008-07-03T13:35:31-07:00

PLEASE DONT FLAG MY STUFF ! ...I DONT KNOW WHY IT GETS FLAGGED AS IM A NICE GUY AND ALL AND JUST TRYING TO SELL SOME OF MY THINGS ! THIS IS LIKE NEW AND ONLY ONE SIDE WAS USED LIKE 2 TIMES. 1ST $25 CASH TAKES IT. CALL MARK AT 503-324-0657 ...ALSO HAVE A ANGLE GRINDER WITH 2 NEW WHEELS THAT WORKS AND LOOKS GREAT ! $15.00 ....THANKS FOR LOOKING.

WELDER (SALEM) $400

2008-07-03T13:25:00-07:00

THIS MILLER 400P WELDER HELI ARC TWO OR THREE PHASE HOOK UP IS A NICE
LARGE UNIT WITH 200 FT CORD, CALL STEVE AT (503)917-9813

IRON SHOP TABLE (SALEM) $150

2008-07-03T13:24:42-07:00

THE TABLE MEAS 3FTX8FT, HEAVY DUTY, CALL STEVE AT (503)917-9813.

NEW Snap-on Harley Davidson Edition Tool Box NEW PRICE (Vancouver I-205) $3000

2008-07-03T13:20:54-07:00

Brand New Snap-on Tool Box Combo, 2005 Limited Edition Harley Davidson box, PART # KRL75651PLH, THIS BOX IS BRAND NEW AND NEVER BEEN OPENED YET, COMPLETELY SEALED !!! I have two of these and don't need the second one! Paid over $6000.00 NEW!! Bottom box has 7 drawers and top box has 4, Both boxes are black and have Chrome Fronts with the top box having Pinstripe Flames and the Harley Logo!

Boxes measure 36" wide by 24" deep by 5' tall

Pictures are of a like box but not mine as mine is still sealed in the cardboard box!!

Please Call 503-708-3565

Lincoln Wire Feed Welder (110) (Yamhill, Oregon) $200

2008-07-03T13:17:37-07:00

Lincoln Electric Weld-Pak 130 wire feed welder, 110V, spool of wire included, cart for easy transport, and the tank with regulator. The setup is ready to go. Welder works great.

971-645-0766 Alex

Central Pneumatic Contractor Series air nail gun in great condition. (vancouver) $50

2008-07-03T13:15:16-07:00

For sale I have a Central Pneumatic Contractor Series air nail gun in great condition.
�28� magazine angle for maximum maneuverability in tight work areas, and fast and easy rear loading.
Shoots 8-10 gauge clipped head nails.
Full sequential firing safety.
�Anti-jam magazine.
�Molded comfort grip.
�Great for framing, fencing sheathing, decks, and pallets.

Weight: 8-1/2 lbs.
Paper collated nails are recommended.

call me at 425-502-2300

Craftsmen 10" Table Saw (Yamhill, Oregon) $125

2008-07-03T13:14:40-07:00

Contractor series Craftsmen 10" Table Saw, 3hp used very little. Works perfect, just don't have the room in the garage. Has cast Iron table and miter gauge.
971-645-0766 Alex

600 ft Torque wrench k-d made usa (Happy valley) $200

2008-07-03T13:10:29-07:00

Torque wrench never used has slip in box,Bought new from Hall tool co. exellent cond steve 503 577 7223

track lubricator CAT (beaverton) $185

2008-07-03T13:06:58-07:00

old CAT track lubricator hand pump

GAS PRESSURE WASHER (PORTLAND)

2008-07-03T13:06:22-07:00

GAS PRESSURE WASHER WITH HOSE AND WAND
GENERAC 2300PSI WITH 6HP BRIGGS ENGINE
$250.00
DENNIS 503-804-2915

Trans Jack 1700 lbs.cap Wilmar (Happy valley) $220

2008-07-03T13:05:25-07:00

Wilmar Trans Jack aprox 36 raised 1700 ibs.cap bought new from tool peddler exellent steve 503 577 7223

Sewer Mini Jetter (Happy valley) $750

2008-07-03T13:03:52-07:00

Mini Jetter Gortiz 110 vollt cleans 2-3" lines about 5 years old very little use ,psi can be varied 1200 psi to 1800 psi 100 foot jetter hose exellent cond can demo steve 503 577 7223

HITACHI NR83 A2 NAILER (PORTLAND)

2008-07-03T13:03:30-07:00

NEW HITACHI NR83-A2 FRAMING NAILER
WHY PAY RETAIL?
$260.00
DENNIS 503-804-2915

Starrett master precision level $300

2008-07-03T13:03:04-07:00

Master precision level

Starrett Model 199 master precision level with case. Accuracy per graduation line is .0005 per 12 inches. I paid $500.00 15 years ago. I don�t know how much Starrett is asking today, but at $300.00 cash I�m offering someone a good deal.
I will deliver this item anywhere within a twenty mile radius of Hillsboro.
If interested, call Mark at 503-869-6479.

20 ton air jack (Happy valley) $175

2008-07-03T13:02:41-07:00

20 ton air jack exellent cond used couple times, Bought new from Harbor Freight like new cond, steve 503 577 7223

post drill (beaverton) $175

2008-07-03T13:02:31-07:00

hand powered old post drill
works good

CRAFTSMAN Drill press - Bench style (kelso) $100

2008-07-03T13:01:44-07:00

8in. drill press with h.d.vise...620-3100 rpm 3speed very,very quiet little work horse.Excellent condition call 360-442-6626

Landa wet sand blaster (NW port) $300

2008-07-03T12:55:58-07:00

Landa wet sandblaster 500 pound pot uses 3-4,000 psi pressure washer, New tip exellent cond steve 503 577 7223 can e mail pics

CONTRACTORS LOOK! Made in USA!!! (kelso) $70

2008-07-03T12:50:51-07:00

Chop saw/Compound Miter saw STAND ! 500 lb. rating,folds for portability.Its all aluminum so it will never rust.Tools not included this is the STAND ONLY!This is a firm price and won't last long.Dimensions:36 in tall-71/2 in wide-6ft long. Very Handy call 360-442-6626 thanks

Hyster Forklift 4,000 porpane (NW Ind PORT) $1600

2008-07-03T12:50:18-07:00

Hyster model S40E parts still avabiable built 80s 4,000 cap side shift hard tires ,New seat 4 cyl.Have new rollers for mast and new electric fan.New propane tank, 36"forks . Great forklift,Call steve 503 577 7223

Honda HRX self propelled mower (Hillsboro) $500

2008-07-03T12:50:11-07:00

I have two Honda lawnmowers and it is time to say good-bye to one of them. Bought this one last year and it is a GREAT mower that cuts and mulches. Paid $699, and runs like new (because it is as good as new).

craftsman air compressor 4hrs 25gallon 100 ft hose (port) $125

2008-07-03T12:50:06-07:00

works perfect this will go fast first come first serve $125 503-415-0923

Craftsman Professional Contractor Air Compressor (Kelso) $275

2008-07-03T12:50:01-07:00

Lightly used...Works excellent!Powers up in 2-3 mins. 150 psi,Adjustable press. regulator ,twin ports,Maintence-free / oilfree.Its very quiet,compact and light enuff to take about anywhere. This is in like new condition so the price is firm,if it doesn't sell I'll just keep it since it cost me nearly double to replace it. My loss your gain---just coming up short for the 4th wkd.Call 360-442-6626 Thanks

Stihl 051 AV Chain Saw (NE Portland) $175

2008-07-03T12:44:28-07:00

I have a chainsaw that was my fathers. I have no need for a saw this big. He said it runs good but would need a little work to be a reliable saw. Please call 503-502-2971 for more info. Thank You

Weaver single post inground lift 8k cap rebuilt new seals nice (Portland) $450

2008-07-03T12:26:55-07:00

Weaver single post inground lift 8,000lb capacity rebuilt with new seal top and bottom chrome cylinder in nice shape. came from a low volume car dealership. had a leaking external air line lift was replaced with a new 10k electric/hydraluic inground twin post. $450.00 obo can deliver and or install for you if needed. will require a site inspection for a quote. any questions 503-936-9886 Hutch

LANDA PC3-2400 GAS PRESSURE WASHER $375

2008-07-03T12:23:45-07:00

Landa PC3-2400 pressure washer with hose, gun & washing nozzel. 2400 PSI, 5.5 HP. Excellent running condition. $375.00 Call day time hours 503.758.7496.

e-mail vnw.residential@gmail.com

Porter cable 6" saw boss circular saw model 345 (Beaverton) $60

2008-07-03T12:17:46-07:00

Used. Once. Perfect condition. Nothing wrong. Email if interested.

Landa Pressure Washer 24hp (scappoose) $6500

2008-07-03T12:04:53-07:00

This is a commercial grade pressure washer. It was built by Landa. We bought it new about a year and a half ago. We are downsizing so this is the one to go. This machine is powered by a 24hp Honda v-twin motor. The pump is a 2000 psi pump at 10.5 gallons per minute. We had this built so we could clean roofs without damaging them and it works like a charm. We have two Hanay reels, one with 300 ft of high pressure hose and the other with 100 ft of hose to fill up the 330 gallon water tank. This is all mounted on an Iron Eagle trailer. The trailer has dual axels so it is no problem hauling water if you need to. We were able to haul this full of water easily with a F250. Small pickups would have trouble hauling while full, but empty, no problem at all. The trailer has new tags good until 2010 in Oregon.

Let me know if you have any questions or need any info that I missed. We paid $10,000 for the whole setup. We are asking around $6500 for the whole thing, or we can part it out...let me know what you would like and we can work something out. We are somewhat flexible on the price of the whole thing, so let me know what you would like to offer. I can send you pics by email.

Thanks for looking. Call 503.810.9842 if interested. My name is Joel.

Ridgid laminate trimmer (Carlton) $30

2008-07-03T12:04:46-07:00

Electronic feedback-for consistent speed and power. Replaceable brushes-easily accessible external brush caps. Variable speed-adjust speed to material type. 6 AMP permanent magnet motor-for extra power in a compact size. Depth scale-easy to read for quick set-up. Thumb wheel depth adjustment-for easy depth setting. 1/4 In. collet-accepts most 1/4 In. bits. Die cast base-for greater durability and dependability. Lighted plug-to easily identify live tools.

Electronic feedback for consistent speed and power
Replaceable brushes with easily accessible external brush caps
Variable speed adjust speed to material type
6.0 amp permanent magnet motor for extra power in compact size
MFG Brand Name : RIDGID
MFG Model # : R2400

Call Kim (503)515-4385 or cooper4203@msn.com

Colemam 1600w Generator (Van WA) $175

2008-07-03T11:49:07-07:00

Coleman 1600w Portable Generator, Runs great & verry clean. Great for camping or running tools at power less job site. 360-597-8917

3 phase variable frequency motor controller (SW PDX) $149

2008-07-03T11:48:28-07:00

Model GS2-23PO Single/three phase 230VAC input; 230 VAC three phase variable frequency output. Can be used to power up to 3 horse power from three phase input or up to 1 horse power motor from single phase. Used, but working. Great reliability and invaluable where you need soft start or need to accurately control speed. Moved to 480 volts and no longer need. $289 new from Automation Direct (see link)

http://web2.automationdirect.com/adc/Shopping/Catalog/AC_Drives/GS2_(115_-z-_230_-z-_460_-z-_575_VAC_V-z-Hz_Control)/GS2_Drive_Units_(115_-z-_230_-z-_460_-z-_575_VAC)/GS2-23P0

Over 40 Different Styles Of Gloves Glove NEW Singles Or Quantity (NE Portland)

2008-07-03T11:44:37-07:00

Hello, currently we have dozens and dozens of differnet types of gloves we are selling for cheaper than you can get anywhere else. Types include gardening , work , welding , youth , riding , ladies , latex covered , latex and many more types of gloves. I am currently going through and finding out what quantity and sizes we have available and will update this post when I have that info. In the meantime if there is a glove that you are interested in. Let me know what size you want and I'll check and see how many are available. Make me an offer I cant refuse. The more you buy the cheaper I will be willing to go. Here are more detailed pictures of each glove in the thumbnails and more gloves that are not in the thumbnails. http://s313.photobucket.com/albums/ll399/glovesforsale/

GREAT DEAL ON SHOPSMITH MARK V (SW Portland) $2000

2008-07-03T11:42:16-07:00

Need to sell Mark V 2HP Home Workshop System. I bought it several years ago and have never had a chance to use to it. If you know what the system is, you'll know what a deal it is. If not, this is the system to have and has the capacities of a commercial table saw for all home projects, big and small and can grow with you. My system comes with all the standard features, but I also purchased the extra Starter Accessory Package. (See pictures below) Willing to work with you on pricing to make a deal so call to find out more. (206)424-5276

DELTA 10" Tilting Arbor Unisaw (St. Helens) $895

2008-07-03T11:36:26-07:00

This is a 3hp 220v single phase saw aprox 12 years old with hardly any use time. Has a unifence. Have owned it for over 8 years and used it 1 or 2 times. Phone 503-366-4402 or 503-299-0332 or reply to ad.

BLACK.&.DECKER......CORDLESS..DRILL..and..SAW...........NEW (Beaverton) $30

2008-07-03T11:35:02-07:00

NEW, Black & Decker drill and saw.
7.2 volt with 6 batteries, charger and carrying case.
503-267-6569

2005 Riding Mower (east pdx) $350

2008-07-03T10:54:48-07:00

2005 yard machine LUV BUG 24" cutting deck 6.75 hp Briggs engine, Like new, hardly used and runs great
503-260-2548

Tweco 12ft Weldskill Wire Feed Gun (Vancouver, WA) $75

2008-07-03T10:37:54-07:00

400 amp wirefeed gun, brand new condition only used once. Tweco back end.

Tweco 400 amp Spraymaster Wirefeed gun NEW IN BOX (Vancouver, WA) $100

2008-07-03T10:37:19-07:00

12 ft. Wirefeed Spraymaster with Tweco back end. New liner included. Never used.

50 FT AIR HOSE (BANKS) $5

2008-07-03T10:25:30-07:00

SOLD COMPRESSOR SO I HAVE NO NEED FOR THIS HOSE. IT HAS FITTINGS ON BOTH ENDS. $5.00 CALL MARK AT 503-324-0657

Nice heavy hand truck dolley cart (122nd NE Portland) $30

2008-07-03T10:24:47-07:00

Nice heavy hand truck dolley cart. Great used condition!!

C-CLAMP STYLE VALVE SPRING COMPRESSOR (BANKS) $20

2008-07-03T10:21:16-07:00

LIKE NEW..$20.00 CALL MARK AT 503-324-0657

( 1 ) GAS BLOWER AND ( 2 ) LAWNMOWERS (BANKS) $25

2008-07-03T10:21:08-07:00

(1) SEARS CRAFTSMAN LAWNMOWER WITH REAR BAGGER AND FRONT WHEEL DRIVE. STARTS BUT WONT STAY RUNNING. ...(1) YARDMACHINE MOWER THAT STARTS ON 1ST PULL BUT NOT RUNNING SMOOTHLY. ... (1) WEEDEATER BRAND GAS HAND BLOWER. RUNS BUT NEEDS NEW FUEL LINE. $25.00 TAKES ALL OR, $10 EACH SEPERATELY. ... CALL MARK AT 503-324-0657

DeWalt Radial Arm Saw Needs Motor (Donald/Aurora) $20

2008-07-03T10:20:16-07:00

DeWalt Radial Arm Saw Needs Motor $20.00
Motor is torn apart and in the box.
Call Dale @ 503-678-5816
or Robert @ 503-833-2120
No Saturday Calls Please.

Monarch Precision Lathe (George, Washington) $7200

2008-07-03T10:19:55-07:00

12" x 20" Monarch 10EE Precision Lathe. Speeds up to 4000 rpm. Solid state Electronics. Serial Number 32121. Machine in good shape. I have several other lathes, boring machines and fabricating shop equipment. Call 541-543-0316 for details.

Heater Outdoor Propane (Sherwood) $50

2008-07-03T10:18:28-07:00

propane patio heater, add tank for $25.00, 503-969-2135, nwdhomes@aol.com